How to price lawn mowing: work out what each billable hour must earn to cover labour, equipment, fuel, insurance, overhead and profit, then charge each lawn using the time it takes on site plus travel. Most crews end up charging a flat price per cut, with a minimum, and adjust it for size, slope and obstacles.
There’s no single “right” rate. Local rates vary a lot, so use any rate you read online, including here, as a sanity check against your own numbers, not a price list. All figures below are worked examples, not market data.
Start with your cost per hour
A common mistake is pricing from what the neighbour charges. Start from your own costs. Add up a year of expenses, divide by the hours you can really bill, then add profit.
| Cost (example, per year) | Amount |
|---|---|
| Wages and payroll costs for one two-person crew | $62,000 |
| Truck, trailer, fuel and maintenance | $14,000 |
| Mowers, trimmers, blowers, blades, repairs | $6,500 |
| Insurance, licences, phone, software | $4,500 |
| Overhead and owner’s admin time | $8,000 |
| Total | $95,000 |
If that crew bills 1,100 productive hours a season (not 8-hour days, because driving and loading aren’t billable), the break-even is about $86 per crew hour. Add a 20% profit margin and you need roughly $104 per crew hour. Our contractor hourly rate calculator and labour burden calculator help you do this with your own numbers.
Three ways to price a cut
| Method | How it works | Best for | Watch out for |
|---|---|---|---|
| Per hour | Hours on site × your crew rate | New clients, messy or overgrown lawns, one-off cuts | Customers dislike open-ended hourly pricing for weekly service |
| Per square foot | Mowable area × a price per 1,000 sq ft | Quoting fast from satellite measurements | Ignores slopes, gates and obstacles |
| Flat per cut | One agreed price every visit | Recurring weekly or bi-weekly clients | You must estimate the time correctly up front |
Method 1: per hour
Time the first cut, multiply by your crew rate and quote that. It’s the most accurate way to learn how long a property takes, and you can convert it to a flat price afterwards.
Method 2: per square foot
Measure the mowable area (not the whole lot: subtract the house, driveway and beds). Divide by how many square feet your crew mows per hour, then multiply by your hourly rate. Use our square footage calculator to measure quickly.
Method 3: flat per cut
Most customers want a fixed number they can budget. Quote one price per visit based on the timed average, and review it once a year.
Worked example: one lawn, three methods
A suburban front and back lawn, 7,500 square feet of mowable grass, one side gate, a mild slope, a two-person crew with a $104 per crew hour target.
| Step | Number |
|---|---|
| Mowing speed for this crew (two people, two mowers) | about 18,000 sq ft per hour |
| Mow time | 7,500 ÷ 18,000 = 0.42 hours (25 min) |
| Trim, edge, blow | 15 min |
| Load, unload, move between lawns (average) | 10 min |
| Total time | 50 min = 0.83 hours |
| Per-hour method | 0.83 × $104 = $86 |
| Flat per cut (rounded) | $85 weekly, $95 bi-weekly |
Why bi-weekly costs more per cut: grass is longer, mowing is slower and bagging or clumps appear. Charging the same for both is a common way to lose money.
Round to the nearest $5. Prices like $85 look planned. Prices like $83.47 look like you guessed.
Set minimums and surcharges
Small lawns are not profitable at a pure per-square-foot rate because driving and setup take the same time as a big one. Set a minimum per stop, based on that fixed time. If loading, driving and wrapping up takes 15 minutes of crew time, your minimum has to cover that before you start cutting.
- Overgrown first cut. Charge 1.5× to 2×, or switch to hourly.
- Steep slopes or tight gates. Add a surcharge for push mowing or hand work.
- Debris and leaves. Quote leaf and debris removal as a separate line.
- Edging and trimming. Bundle it in, or price add-ons clearly.
- Fuel and disposal. Roll into the rate, don’t surprise people with a surcharge.
Route density: the hidden profit lever
The same $85 cut earns very different profit depending on drive time. If a crew spends 25 minutes between each stop, a third of the day isn’t billable. Bunch clients by street and neighbourhood, and give new clients on your existing routes a slightly better price than ones that need a 20-minute detour.
| Scenario | Stops per 8-hr day | Revenue at $85 | Billable share of the day |
|---|---|---|---|
| Tight route, 5 min drive | 8 | $680 | about 83% |
| Spread route, 20 min drive | 5 | $425 | about 63% |
Those figures are illustrative, but the lesson holds: route density is worth more than a $5 price increase. Use a calendar that groups jobs by day and area. Contruva’s scheduling lets you set up recurring jobs and assign crews, and the crew app shows each stop. Note that Contruva doesn’t do GPS route optimization, so you’ll group stops yourself.
Seasonal contracts vs per-cut pricing
A seasonal contract (a fixed monthly price from spring to fall) smooths your cash flow and your customer’s budget. Per-cut pricing is simpler to sell and easier to adjust when the weather swings.
| Per-cut | Seasonal contract | |
|---|---|---|
| Customer budgeting | Varies with weather | Same every month |
| Your cash flow | Bumpy | Predictable |
| Risk in a dry summer | Lower revenue | You keep the fixed price |
| Risk in a wet spring | Higher revenue | Extra cuts for free |
| Cancellation | Easy for the client | Harder, but spelled out |
If you offer a contract, put the number of visits, what’s included and a weather clause in writing. Our landscaping pricing guide covers bigger jobs, and starting a landscaping business in Canada covers the setup.
Add-on services that raise the ticket
Mowing is the entry product. The profit often comes from add-ons that use the same truck and the same stop, so you aren’t paying for extra drive time. Price each add-on on its own line so customers can say yes to some and no to others.
| Add-on | How to price it | Note |
|---|---|---|
| Spring and fall cleanup | Hourly or flat by lot size | Needs a disposal plan; quote leaves by the bag or by the hour |
| Aeration and overseeding | Per 1,000 sq ft, with a job minimum | Seasonal, so sell it by text in the shoulder months |
| Fertilizing and weed control | Per application or as a 4–6 visit program | Check licensing rules where you work |
| Hedge trimming | Hourly, with a minimum | Photos on the quote avoid scope arguments |
| Mulch and bed work | Material at cost plus markup, labour on top | See the markup calculator |
A simple script helps: after the first visit, text “Your lawn is looking good. Want me to add a fall cleanup and aeration to your plan? I can book it on your regular day.” Most add-on sales come from asking at a convenient time, not from a hard pitch.
Pricing mistakes that sink mowing businesses
- Pricing from competitors instead of your costs.
- Forgetting travel, loading and equipment downtime.
- No minimum, so tiny lawns lose money.
- Using the same price for weekly and bi-weekly visits.
- Never raising prices, so inflation quietly eats your margin.
- Charging cash with no record. You can’t grow what you can’t track, and you may owe tax. This is not tax advice: check with CRA or the IRS.
How to raise prices without losing clients
Raise everyone together, at the start of the season, not one by one in the middle of summer.
Send a text or email 30 days ahead with the new price and one short reason: fuel, insurance, labour.
A 5% to 8% increase each year is easier to accept than a 20% jump after three years of silence.
Weekly at one price, bi-weekly at another, or a seasonal plan. Some clients will switch levels instead of leaving.
Once prices are set, the rest is admin: recurring jobs, reminders, invoices and card payments. Contruva handles those in one plan with Stripe payments, and its AI receptionist answers new-client calls while you’re on the mower. Try it free for 7 days.
