All guidesHow-toPricing guide · Updated November 2026

How to pricetree removalwithout guessing.

Price tree removal from your costs, not from a per-foot guess: crew hours, equipment, disposal, risk and margin, then check the number against the local market. Here’s the method with worked examples.

Here’s how to price tree removal: add up crew labour hours, equipment cost per hour, disposal or chipping, and a risk allowance, then add overhead and profit, and compare the total to what local customers actually pay. Published 2026 consumer guides put a typical single-tree removal at roughly $400 to $1,200, with a national average near $850, but those are market ranges, not your costs.

Per-foot rules of thumb exist (one consumer guide cites about $9.50 to $14.50 per foot of height), but they ignore the things that sink tree jobs: a house in the fall zone, no truck access, power lines. Use them as a sanity check after you’ve built the price from costs. This page is general guidance, not a quote for your area.

What do customers pay for tree removal?

Consumer-facing price guides published in 2026 vary a lot: Lawn Love shows a national average of $850 with a typical range of $385 to $1,070; HomeGuide’s February 2026 data shows $400 to $1,200 for many jobs; Homewyse’s January 2026 estimate was $614 to $750 per tree. Canadian guides we found describe most residential removals as roughly $200 to $2,000, with storm and emergency work higher. These are what homeowners report paying, they’re wide, and they’re no substitute for your own cost math.

How to use market ranges

Build your price from costs first. If it lands far above the local range, check whether you’re over-counting. If far below, you’re probably forgetting overhead.

What drives the price of a tree job

DriverPushes price up when…
Height and trunk diameterBigger trees mean more pieces, more rigging, more hauling
AccessNo bucket truck access, fences, gardens or backyard-only access
HazardsPower lines, buildings, pools or neighbours’ property in the drop zone
Tree conditionDead, rotted or leaning trees are less predictable
TechniqueClimbing and rigging down in pieces take longer than a straight drop
DisposalChipping on site vs hauling logs vs leaving firewood
PermitsSome municipalities require a permit or arborist report
UrgencyStorm damage and emergency call-outs

A pricing formula you can reuse

1
Estimate crew hours.

Walk the site and decide the method, then count person-hours including setup and cleanup.

2
Multiply by your loaded labour rate.

Include payroll costs, workers’ compensation and insurance. Our labour burden calculator helps.

3
Add equipment by the hour.

Chipper, truck, bucket truck, saws, fuel and wear.

4
Add disposal and dump fees.

Per load, with travel time.

5
Add a risk allowance.

A percentage for hazards, commonly priced in as a line you can explain.

6
Add overhead and profit.

Use a markup that covers office, insurance, marketing and a real margin. See the contractor markup calculator.

Worked examples

These use illustrative rates only: $45 per person-hour loaded labour, equipment $120 per hour, dump fee $80 per load, 30% markup for overhead and profit.

Example 1: 30-foot maple, open yard, no hazards

ItemCalculationCost
Labour3 people × 3 h × $45$405
Equipment3 h × $120$360
Disposal1 load$80
Direct cost$845
Markup 30%845 × 0.30$253.50
Price$1,098.50

Example 2: 50-foot oak over a garage, piece-by-piece

ItemCalculationCost
Labour4 people × 7 h × $45$1,260
Equipment7 h × $120$840
Disposal2 loads$160
Risk allowance 10% of the above2,260 × 0.10$226
Direct cost$2,486
Markup 30%2,486 × 0.30$745.80
Price$3,231.80

The second job is three times the first, even though the tree is only 20 feet taller. That’s why a per-foot rule can leave you under water.

Example 3: dead pine, backyard only, no equipment access

No truck can reach the tree, so everything is carried or dragged out through a gate. That’s slower labour and more of it.

ItemCalculationCost
Labour3 people × 6 h × $45$810
Equipment4 h chipper and saws × $120$480
Disposal2 loads$160
Risk allowance 10%1,450 × 0.10$145
Direct cost$1,595
Markup 30%1,595 × 0.30$478.50
Price$2,073.50

Notice that the equipment line is lower than in example 2 because the bucket truck isn’t used, but labour hours are higher. Keeping each line separate in your own notes lets you see which cost moved.

Checking your result

Divide your price by crew hours to get revenue per crew-hour. If example 1 pays $1,098.50 for 3 hours with a three-person crew, that’s about $366 per crew-hour, or $122 per person-hour. Compare that with your target. If a job pays less per crew-hour than your average, either the price is too low or the job is slower than you think. Track actual hours on every job for a month, and you’ll price the next hundred more accurately.

Price add-ons separately

Customers expect to see stumps and cleanup as options. Consumer guides list stump grinding around $180 to $525 and debris hauling around $75 to $250 per trip, and wood left on site is often free where hauling costs extra. Offering good, better, best choices raises your average ticket without arguing about price:

OptionIncludes
BasicRemove tree, leave wood in lengths on site
StandardRemove tree, chip branches, haul brush
Full serviceStandard plus stump grinding, rake and clean up

Hazard and access pricing

Put hazards in writing. A tree close to a power line may need the utility to disconnect or shield it, which affects schedule and cost. Rope-and-rig work around a building takes more people and time. Be upfront: “This tree sits over your garage, so it’s removed in pieces and priced accordingly.” Customers who understand the reason accept the higher price. Check your insurance and local rules for work near utilities.

Build a price book once

Most of your jobs fall into a handful of patterns: small ornamental removal, medium tree in open yard, large tree with a drop zone, large tree over a structure, storm cleanup by the hour. Price each pattern once using the formula, save it as a starting line item, then adjust for access and hazards on site. A price book turns a twenty-minute estimate into a five-minute one and keeps your crews, estimators and any helper quoting the same way. Review it every spring when fuel, insurance and wage costs reset, and write down the date you last updated it.

Keep a log of actual hours and costs for each finished job next to the quoted price. After twenty jobs you’ll see which patterns you underprice, and you can fix the price book instead of working harder to make up the gap. If you also run grass and garden work, the same approach applies to pricing lawn mowing.

Pricing mistakes to avoid

  • Quoting by height only and ignoring access and hazards.
  • Forgetting travel time to the dump or yard.
  • Using last year’s fuel and equipment costs.
  • Giving a verbal number at the curb with no written scope.
  • Discounting to win a job and then losing money doing it. A cheaper job costs the same crew day.

What to say when the customer says “that’s too much”

Don’t drop the price first. Ask what they were expecting and what they’re comparing it to. Often the other quote leaves out stump grinding, haul-away or insurance. Walk through your line items: “Mine includes the crew, chipper, haul-away and cleanup. Does the other quote include those?” If they still want to lower the price, reduce the scope, for example leaving the wood on site, instead of reducing your margin. Also confirm that anyone you compete against carries liability insurance and workers’ compensation; the customer carries the risk if they don’t.

Seasonality matters too. Many tree companies are busiest after storms and in late fall, and a little quieter in deep winter. Price emergency and storm work higher because it displaces scheduled jobs and carries more risk, and state that in the quote so it’s not a surprise.

Writing and sending the quote

List what’s included (removal, chipping, haul-away, stump), what isn’t, and when it’s valid. Add photos of the tree. Contruva’s quotes let you save line items like “stump grinding” and send three options with photos in a couple of minutes. For the full workflow, see tree care business software, or compare how landscaping jobs are priced. Customers who request a quote after hours can be answered by the AI receptionist. Start with a 7-day free trial.

01Questions

Straight answers.

Still unsure? Call us at +1 (647) 922-5436. A real person picks up.

Ask us anything

How much should I charge to remove a tree?

Published 2026 consumer guides show typical single-tree removals of about $400 to $1,200. Your price should come from crew hours, equipment, disposal, risk and margin, then be checked against the local market.

How do tree services price per tree?

Most price per job, not per foot, based on tree size, access, hazards and technique. Per-foot rules are only a rough check.

Should stump grinding be included in a tree removal price?

Usually it is priced as an optional add-on so the customer can choose, and so the base price stays competitive.

What is a good profit margin for tree removal?

It depends on your overhead and equipment. Work out your real costs first, then use a markup that covers overhead plus a profit you can live with.

Do I need a permit to remove a tree?

Some municipalities require one, especially for large or protected trees. Check your local rules and tell the customer who is responsible.

Quote every tree in minutes.

Saved line items, photos and one-tap approval.

Start free trial