All comparisonsBest ofUpdated November 2026 · Updated November 2026

HVAC estimating softwarefor residential jobs:7 options compared.

The best HVAC estimating software for a residential shop prices a repair, a replacement or a maintenance agreement in minutes, from a saved price list, and turns the estimate into a signed job without retyping. Here are seven options, with prices checked in November 2026.

HVAC estimating software for residential work is really quoting software with an HVAC price list: flat-rate prices for common repairs and replacements, good, better, best options, and a way to send the estimate from the truck and get it signed. The seven options below cover that job, from Contruva and Jobber at the small-shop end to ServiceTitan at the large-shop end, plus the commercial takeoff tools that do a different job entirely. Prices were checked on each vendor’s own site in November 2026.

If you do commercial mechanical work, read the last section first: the tools that estimate ductwork takeoff from mechanical plans are not the tools on this list, and buying one by mistake is an expensive error.

Residential estimating is not commercial takeoff

Residential HVAC estimating is fast and repetitive. A furnace replacement, an AC install, a capacitor swap, a maintenance agreement: the same jobs, the same parts, the same prices, week after week. What you need is a saved price list, options the customer can pick from, and a signature. The estimate should take minutes, not hours.

Commercial HVAC estimating is slow and unique. Every job is a different building, a different set of mechanical plans, and a ductwork takeoff measured in hundreds of hours. What you need there is takeoff software that reads plans and prices duct, pipe and equipment. The two jobs share a name and almost nothing else.

This page is for residential HVAC shops: repairs, replacements and maintenance agreements. The commercial tools get their own section at the end so you can tell them apart.

The shortlist at a glance

Every price below is in US dollars unless it says CAD, checked November 19, 2026, before tax.

SoftwareFromPricing modelEstimating strength
Contruva$249.99 CAD/moOne flat plan, no per-seat feesPrice catalog or AI-priced from past jobs; options and online signing
Jobber$29 USD/moPer plan, priced by team sizeQuotes with optional line items on Grow; flat-rate book is manual
Housecall Pro$59 USD/moPer plan, priced by usersPrice book on Basic; flat-rate pricing on Essentials; sales proposals on Max
ServiceTitanQuote onlyPer technicianCentral pricebook, mobile estimates, enforced rate rules
JobTreadOne monthly pricePer internal user, all featuresEstimates, budgets and job costing for project work
FieldPulseQuote onlyPer seat, customizedMarkup and target-margin tools, bundles, quantity formulas
STACK / FastDUCT / Trimble$2,000+/yr (third-party figures)Annual, per seatCommercial ductwork takeoff, not residential quoting

If you only read one row: a residential HVAC shop that wants fast estimates and a signed job should start with Contruva, Jobber or Housecall Pro. A shop that does commercial mechanical work needs the takeoff tools in the last section instead.

1. Contruva

Contruva’s estimating is built for a residential HVAC shop that quotes from the truck. You build quotes from your price catalog, or let Contruva AI price them from your past jobs, and send them before you leave the driveway. The customer sees good, better, best options, signs on their phone and pays a deposit, and follow-ups go out automatically until they answer.

Price: $249.99 CAD or US$179.99 a month, one plan, no per-seat fees, with a 7-day free trial and no credit card to start. The AI receptionist answers the after-hours no-heat calls and books them into real open slots, which is where a lot of HVAC estimating starts: the estimate only happens if someone answers the phone first. See the quoting software page for the full flow, and the best HVAC software roundup for the wider comparison.

Honest limits: Contruva has no commercial takeoff, no GPS tracking or route optimization, no payroll and it is not accounting software. If your work is mostly commercial mechanical, the takeoff tools below are the right category.

2. Jobber

Jobber is the most common choice for small HVAC crews, and its quoting is clean and fast on mobile. You build quotes with line items, add photos and reviews on the Grow plan, and offer optional line items the customer can tick on or off, which works well for a furnace replacement with add-on options like a humidifier or a better filter.

Price (USD, checked November 19, 2026): Core starts at $29 a month on annual billing ($49 month to month) for one user. Connect starts at $99 a month annual ($139 month to month), Grow at $149 ($199), and Plus at $399 ($499) for five users. Extra users are $29 a month each, and there is a 14-day free trial.

The detail that matters for HVAC: automated quote follow-ups start at Connect, job costing and two-way texting start at Grow, and quote customization with photos and reviews starts at Grow. Jobber has no flat-rate pricing book, so you build repeat-task prices yourself as saved line items. Our full breakdown is on the Jobber pricing page, and the HVAC estimate template shows what a good estimate contains.

3. Housecall Pro

Housecall Pro is the strongest of the big three for straight residential estimating, because the price book is on the entry plan and flat-rate pricing arrives one tier up. Its estimates pull in flat-rate prices, labour and material costs, and the online booking flow suits the standard repair and tune-up jobs customers book themselves.

Price (USD, checked November 19, 2026): Basic is $59 a month on annual billing ($79 month to month) for one user, and includes a price book, job costing, online booking, scheduling, estimates and invoices. Essentials is $149 a month annual ($189 month to month) for five users and adds flat-rate pricing, routes and GPS tracking. Max is $299 a month annual ($329 month to month) for eight users and adds a sales proposal tool, recurring service plans and route optimization. There are no long-term contracts, and the free trial is 14 days on the Max plan.

For an HVAC shop that sells maintenance agreements, Max is the interesting plan: recurring service plans are a Max feature, and they are the cheapest way to fill a winter calendar. See the Housecall Pro pricing page and our HVAC maintenance agreement template.

4. ServiceTitan

ServiceTitan is the deepest estimating tool on this list, and the most expensive to run. Its strength is control: a central pricebook with configurable margins, mobile estimates, and, on The Works, advanced reporting on estimate performance. A large HVAC company with many technicians and several branches can set the rates at head office and know every tech quotes from the same book.

Price (checked November 19, 2026): ServiceTitan does not publish prices. Its pricing page lists Starter, Essentials and The Works with a “Request Pricing” button, and pricing is per technician. Third-party estimates in 2026 commonly put it around $245 to $500 USD per technician per month, plus a one-time implementation fee roughly between $5,000 and $50,000 USD. Contracts typically run 12 to 36 months and auto-renew. Our full breakdown is on the ServiceTitan pricing page.

For a residential shop of one to ten people, ServiceTitan is usually more system than the estimating job needs. You pay per tech, wait through implementation, and still add Pro products for call answering and marketing. It earns its keep when you have many technicians, a dispatcher and membership plans to manage.

5. JobTread

JobTread is built for project work rather than service calls, which makes it a good fit for HVAC shops that do a lot of installations, retrofits and small commercial jobs alongside service work. Its estimating ties into budgets, schedules and job costing, so an installation estimate becomes a project with a budget you can track.

Price (checked November 19, 2026): JobTread charges one monthly price with all features included. The first internal user is included, and extra internal users are $20 each a month on monthly billing ($16 each on annual billing), with lower rates per user in higher tiers. All prices are in US dollars. There is no free trial; instead there is a 30-day money-back guarantee, and every account gets a customer success manager and onboarding help.

JobTread suits an HVAC company that thinks in projects: a system replacement with a schedule, a budget and subtrades. It is heavier than you need if your work is mostly repairs and tune-ups, where Jobber or Housecall Pro are faster. See the JobTread vs Buildertrend comparison for the project-management side.

6. FieldPulse

FieldPulse is the estimating specialist of the group. A November 2026 review of residential HVAC estimating tools rated it best overall for growing residential HVAC businesses, citing mobile expense entry, markup and target-margin tools, formula-based quantities, reusable bundles and flexible document organization. Those are the controls that matter when your estimates have a lot of parts and you need the margin to hold.

Price (checked November 19, 2026): FieldPulse does not publish prices. Its pricing page says pricing is seat-based and customized to team size and setup, with a custom quote after a demo. There is no free trial; instead it offers a demo built around your trade and team. Its own FAQ says third-party price estimates published elsewhere are not verified by the company, so we are not repeating a number here. Premium add-ons include Operator AI, Chat AI, Engage VoIP, Fleet Tracking, Pricebook, Dynamic Proposals and Custom Forms.

FieldPulse is worth a demo if your estimating is the bottleneck: many parts, many options, and margins you need to protect. It is overkill if you mostly quote the same ten jobs.

7. The commercial takeoff tools

If you bid commercial mechanical work from plans, none of the tools above is the right buy. You need takeoff software: tools that read mechanical plans and measure ductwork, pipe and equipment, then price them. The names that come up in 2026 are STACK, FastDUCT (from FastEST), QuoteSoft Duct, Wendes Mechanical, Trimble Estimation MEP and BuildVision AI.

These are a different world of pricing. A May 2026 comparison of commercial HVAC estimating tools put FastDUCT, Wendes Mechanical and QuoteSoft Duct at roughly $2,000 to $2,500 or more a year, Trimble Estimation MEP at $3,000 or more a year per seat, and BuildVision AI on usage-based pricing quoted after a demo. Those are third-party figures, not vendor list prices, and they are for annual licences, not monthly subscriptions. A residential shop that buys one of these by mistake gets a tool built for reading plans, not for quoting a furnace on a Tuesday.

The rule is simple: if your estimates come from a site visit and a price list, buy a residential tool. If they come from mechanical plans and a ductwork takeoff, buy a takeoff tool. Some large mechanical contractors run both.

How to choose

Pick by the job you estimate most often, not by the longest feature list.

Repairs and tune-ups
Housecall Pro Basic or Jobber Core.

Fast quotes from a price book, online booking, and a signature on the phone. The cheapest way to stop losing small jobs to slow quotes.

Replacements and options
Contruva or Housecall Pro Essentials.

Good, better, best options, flat-rate pricing, and follow-ups that chase the quote for you.

Installations and small projects
JobTread.

Estimates that become budgets and schedules, with job costing you can track.

Many parts, tight margins
FieldPulse.

Markup and target-margin tools, bundles and quantity formulas. Book the demo and bring a real estimate to test.

Large team, many techs
ServiceTitan.

Central rate control, enforced margins and reporting, at a per-technician price with a contract.

Commercial plans and ductwork
STACK, FastDUCT or Trimble.

Takeoff software, priced annually per seat. Not a residential quoting tool.

Whatever you pick, test it on a real estimate before you pay for a year: price a furnace replacement with three options, a capacitor swap from the truck, and a maintenance agreement renewal, and see how long each one takes. The software that makes a $300 repair quote take three minutes instead of thirty is the one that pays for itself. Start with the HVAC estimate template to see what the estimate should contain, and the Contruva pricing page for the flat-price option.

Sources

  • Jobber: pricing: Jobber’s plans and USD prices, billed annually or with no commitment.
  • Housecall Pro: pricing: Housecall Pro’s Basic, Essentials and Max plan prices and user counts.
  • ServiceTitan: pricing: ServiceTitan’s Starter, Essentials and The Works packages with “Request Pricing” instead of a number.
  • JobTread: pricing: The per-user tiers, 30-day money-back guarantee and no free trial.
  • FieldPulse: pricing: Seat-based, quote-only pricing; no free trial; premium add-ons listed.
01Questions

Straight answers.

Still unsure? Call us at +1 (647) 922-5436. A real person picks up.

Ask us anything

What is the best HVAC estimating software for residential work?

For most residential HVAC shops, Contruva, Jobber or Housecall Pro. Contruva prices from a catalog or from past jobs with AI and includes call answering; Jobber is the simplest all-rounder; Housecall Pro has the best price book and flat-rate pricing at its entry tiers.

How much does HVAC estimating software cost?

Published prices checked in November 2026 run from $29 USD a month for Jobber Core and $59 USD for Housecall Pro Basic to $249.99 CAD a month for Contruva’s all-in plan. ServiceTitan and FieldPulse do not publish prices; JobTread charges per internal user with all features included.

Is HVAC estimating software different from commercial takeoff software?

Yes. Residential estimating prices repairs and replacements from a saved price list in minutes. Commercial takeoff software like STACK, FastDUCT and Trimble Estimation MEP measures ductwork and equipment from mechanical plans, and is priced annually per seat.

Does HVAC estimating software do flat-rate pricing?

Housecall Pro includes flat-rate pricing from its Essentials plan. Contruva and Jobber use saved price lists and catalogs instead of a dedicated flat-rate book. FieldPulse has markup and target-margin tools for protecting margins.

Can HVAC estimating software handle maintenance agreements?

Yes. Housecall Pro has recurring service plans on its Max plan, and Contruva, Jobber and JobTread all handle recurring work. Use a maintenance agreement template so the estimate and the agreement match.

Do I need estimating software if I already use a price book?

A price book is the content; the software is the delivery. Estimating software turns the price list into a quote the customer can sign on their phone, follows up automatically, and tracks whether the job made money.

Quotes they sign.

Price it once, send it from site.

Start free trial