All guidesHow-toUpdated November 2026 · Updated November 2026

How to pricea fence installationin Canada.

A typical Canadian backyard fence costs $2,500 to $10,000 installed, and the price is set by the material, the length and the ground you are digging into. Here is how to price one properly, line by line, so the number holds up when the auger hits rock.

To price a fence installation, measure the run in linear feet, pick the material and height, price materials and labour per linear foot, add gates, removal of the old fence, permits and disposal, then add overhead, profit and a contingency for rock and bad ground. Most residential fence projects in Canada land between $2,500 and $10,000 installed, according to 2026 Canadian cost guides, and the method below is how you get from that range to a number you can stand behind.

Fencing is one of the easier jobs to estimate, because it is priced per linear foot, and one of the easier jobs to lose money on, because the ground decides the real cost. This guide gives you the 2026 rates, the per-linear-foot method, the line items, and a worked example. All prices are in Canadian dollars, before HST or GST, unless it says otherwise. This is general pricing information, not tax advice; check the CRA for how tax applies to your invoices.

What does a fence installation cost in 2026?

Canadian cost guides for 2026 broadly agree on the ranges, even if the exact averages differ. HomeStars puts a new fence at $2,500 to $10,000, with an average around $6,000, and installed rates per linear foot by material in mid-sized Canadian urban markets. RenoQuotes puts most residential backyard projects between $3,500 and $12,000, with installed rates from $15 to $155 per linear foot depending on the material.

Fence type, 6 ft highInstalled cost per linear foot, 2026Typical total, 120 ft
Chain link$15 – $25$1,800 – $3,000
Pressure-treated wood$27 – $45$3,240 – $5,400
Cedar$45 – $85$5,400 – $10,200
Vinyl (PVC)$35 – $65$4,200 – $7,800
Aluminum$45 – $90$5,400 – $10,800
Composite$55 – $90$6,600 – $10,800
Ornamental iron$80 – $150+$9,600 – $18,000+

Those are HomeStars’ 2026 installed rates, covering material, labour, posts and concrete on level ground with reasonable access. RenoQuotes’ figures run higher on some materials, for example $25 to $55 a foot for pressure-treated wood and $45 to $95 for vinyl, which is why you should price from your own supplier and crew costs and use the guides as a sanity check. Labour is 40% to 60% of the total installed cost on most fence projects, and pros in Canada generally charge $35 to $65 an hour, though most quote by the linear foot rather than hourly.

Measure before you price

Never price a fence from a photo or a satellite view. Walk the line with the customer and measure it yourself, because the length is the price.

  • Measure the run. Walk the property line with a measuring wheel and record the length in linear feet, section by section. Note every corner, jog and change of direction.
  • Check the height. Six feet is standard for a backyard privacy fence, but front yards are often limited to three or four feet by the municipal fence bylaw. Price the height the bylaw allows, not the height the customer wants.
  • Confirm the line. Ask for the survey or the property stakes. A fence built on the neighbour’s land is a dispute, and moving it costs more than the job was worth. In Ontario, the Line Fences Act covers cost-sharing for boundary fences, so check it when the fence sits on a shared line.
  • Walk the ground. Slope, trees, roots, rock, buried concrete from the old fence, and wet ground all change the digging time. Note them on the estimate.
  • Count the gates. Every gate is a post pair, hinges, a latch and extra labour. A double gate for a driveway is a different price from a single walk gate.
  • Check access. Can the truck and the auger reach the line, or is everything carried through a side gate by hand? Tight access adds hours.

Call before you dig. In Ontario that is Ontario One Call, and every province has its own locate service. It is free, and hitting a gas line or a fibre cable is not. Put the locate on the schedule before the install date, and note on the estimate that the price assumes clear locates.

What drives the price up or down

Five things move a fence price more than anything else. Price them explicitly, or they will eat your margin quietly.

DriverWhy it mattersTypical effect
MaterialThe biggest lever; the spread between chain link and ornamental iron is roughly five timesChain link $15 to $25 a foot installed, ornamental iron $80 to $150 or more
SlopeStepped or racked panels, more concrete, slower diggingA sloped run can add 10% to 25% over a flat run
Rock and buried concreteAugering stops, hand digging starts, posts take twice as longPrice a per-post rock rate on the estimate, the way roofers do for decking
Old fence removalTear-out, disposal and digging out old concrete footingsHomeStars puts removal at $5 to $15 per linear foot
LocationLabour in Toronto and Vancouver runs above smaller centresRenoQuotes puts Toronto and the GTA at $35 to $150 a foot installed, and the Prairies and Atlantic Canada at $20 to $80

Height matters too. An eight-foot fence uses more material, heavier posts and deeper footings than a six-foot one, and some municipalities need a permit above six feet. Check the local fence bylaw before you quote the height.

The pricing method, step by step

Price a fence the same way every time, and the number stops depending on your mood on the day you quoted it.

1
Measure the run.

Linear feet, corners, gates, slope and ground conditions, from a site visit.

2
Price materials per linear foot.

Boards or panels, posts, rails, concrete and hardware, at current supplier prices.

3
Price labour per linear foot.

Your crew’s loaded rate, by material and by ground conditions, not a flat day rate.

4
Add gates, removal and permits.

Each gate as its own line, removal per foot, and the permit fee.

5
Add overhead.

Your overhead rate on top of direct costs. If you do not know yours, work it out from last year’s books.

6
Add profit on purpose.

A planned margin, not whatever is left over. Many contractors aim for 10% net or more.

7
Add contingency.

5% to 10% for rock and bad ground, shown as its own line or built into the price.

8
Add tax on the invoice.

Charge HST or GST on the full price of the job, materials and labour included, if you are registered.

The difference between markup and margin trips up a lot of contractors. Markup is a percentage of your cost; margin is a percentage of your price. A 20% markup on a $10,000 job gives you a $12,000 price and only a 16.7% margin. To hit a 20% margin you need $12,500. Our guide to pricing a contractor job walks through the difference with a worked example, and the free contractor markup calculator does the conversion both ways. Run your layout through the fence calculator to get posts, rails, boards and concrete before you price it.

Pricing labour

Labour is 40% to 60% of a fence job, and the digging is where it hides. Two runs of the same length can take twice as long if one of them is rock and roots.

Price labour per linear foot, not as one lump, and price it by material and by ground. HomeStars puts labour-only rates at $10 to $25 per linear foot, varying by material, fence height and site complexity, and hourly rates at $35 to $65. Use the per-foot rate for the quote, and keep the hourly rate for extras like rock digging. Price your own crew’s time at the loaded rate, not the wage: a $30 an hour labourer costs you more than $30 an hour once you add vacation pay, CPP and EI, workers’ comp and benefits, often 20% to 35% on top.

TaskHow to price itNotes
Post holes and settingPer post, by ground conditionsA post in rock can take three times as long as one in good soil
Panels and boardsPer linear foot, by materialCedar and composite are slower to hang than chain link
GatesPer gate, by sizeA double gate needs heavier posts and more concrete
Removal$5 to $15 per linear footPlus $3 to $8 a foot to dig out old concrete footings, per HomeStars
Clean-up and disposalBin and tipping feesOld concrete is heavy; price the bin by weight, not by volume

Track your crew’s actual hours per fence against the estimate. After five or six jobs you will know your real production rate per foot in good ground and in bad ground, and your prices will stop being guesses. If you want the method in full, contractor job costing explains how to track estimate against actual while the job runs.

Pricing materials by the linear foot

Price materials from current supplier prices, not from memory and not from the last job. Lumber and vinyl prices move, and HomeStars notes Canadian lumber and vinyl costs rose 4% to 7% since 2025, particularly in Alberta and British Columbia. A quote that is two months old can be wrong by enough to erase the margin.

ItemWhat to includeNotes
Boards or panelsPer linear foot, by material and heightHomeStars puts material-only costs at $5 to $12 a foot for chain link and $20 to $45 for cedar
PostsOne every 6 to 8 feet, plus corners and gatesHeavier posts at gates and corners; longer posts for an 8 ft fence
RailsTwo or three per section, by heightThree rails on a 6 ft fence is standard
ConcretePer post, by footing sizeA bag or two per post; more in wet ground
HardwareScrews or nails, brackets, post capsStainless or coated fasteners for cedar, so they do not stain
GatesFrame, hinges, latch, posts and concretePrice each gate as its own line, not per foot

Add 5% to 10% waste for cuts, damaged boards and the odd bad post. Price materials on their pre-tax cost. If you are registered for GST/HST, you claim the tax you paid on materials back as an input tax credit, so marking up the tax-included price and then charging HST again overprices the job. See do contractors charge HST on materials for the full explanation.

Gates, removal, permits and extras

The extras are where fence quotes go wrong, because they are easy to forget and hard to absorb.

  • Gates. A single walk gate is a frame, hinges, a latch and two heavier posts. A double gate is all of that, wider, with a drop rod and more concrete. Price each gate separately.
  • Old fence removal. Tear-out, disposal and digging out old concrete footings. HomeStars puts removal at $5 to $15 per linear foot, plus $3 to $8 a foot for the footings.
  • Permits. Some municipalities need a permit for a fence above a certain height or on a corner lot. Check the bylaw and include the fee.
  • Retaining and grading. A fence on a slope sometimes needs a small retaining step or backfill. Price it when you see it, not after.
  • Staining and sealing. Cedar and pressure-treated wood need sealing, and it is a separate job with its own price. Offer it as an option, not a surprise.

Put a rock clause on the estimate, the way roofers do for decking: a per-post rate for rock or buried concrete found while augering, agreed before you start. When it happens, send a change order from the job and the homeowner approves it on their phone before you keep going. Our guide on how to handle a change order covers that process.

Worked example: 120 feet of cedar, 6 ft high

Here is a full price built the way described above. All figures are illustrative, to show the method, not market rates. Plug in your own supplier prices, crew costs and margin. The fence is 120 linear feet of 6 ft cedar on a flat lot, with one walk gate and the old fence removed.

Line itemCost
Cedar boards, posts and rails, 120 ft at $32/ft$3,840
Labour, 120 ft at $18/ft$2,160
Concrete and hardware$480
Walk gate, framed, with hinges and latch$450
Old fence removal, 120 ft at $8/ft$960
Permit$150
Direct costs$8,040
Overhead at 15% of direct costs$1,206
Break-even$9,246
Profit at a 10% net margin ($9,246 ÷ 0.90)$1,027
Price before tax$10,273
Contingency at 5% (flat lot, good ground)$514
Total with contingency$10,787

That lands at about $86 a linear foot before tax, which sits at the top of the $45 to $85 a foot range for cedar because the example includes removal of the old fence and a new gate. If your number lands far outside the published ranges, check your inputs before you send it: either you missed something, or you are pricing a different scope than the customer is imagining. Add the tax that applies where you work on the invoice.

Presenting the price

How you present a fence price matters as much as the number. A single lump sum invites a yes-or-no decision and a comparison with the cheapest quote. A clear, itemized price invites a conversation about what is included.

  • Show the sections. Materials, labour, gates, removal, permit. The customer can see where the money goes.
  • Give two or three options. Good, better, best: pressure-treated, cedar and vinyl, or the same fence at two heights. Plenty of customers pick the middle, and you stop competing on the cheapest number.
  • State the material and height. Cedar or pressure-treated, six feet or eight, and the post spacing. A fence price without a material is not a price.
  • State the exclusions. Rock digging beyond the allowance, retaining work, staining, permits if not included.
  • Put an expiry on it. Thirty days is common. Material prices move, and an expiry protects you while encouraging a decision.
  • Make it easy to sign. A link they can open on their phone, approve and pay a deposit on beats a PDF they have to print.

For the general template behind this, use our contractor estimate template. For landscaping numbers, see how to price landscaping jobs, and for the quoting process, how to write a roofing estimate.

Pricing mistakes that lose money

  • Pricing from a photo. The length, the slope and the ground decide the price, and none of them show up in a photo.
  • Forgetting the loaded labour rate. Costing a labourer at the wage instead of the loaded rate quietly gives away 20% to 35%.
  • No rock clause. The auger hits concrete on the third post and the day is gone. Price a per-post rate for it.
  • Forgetting removal and disposal. The old fence and its concrete footings are a real cost, and the bin is priced by weight.
  • Marking up the tax-included price. Price materials pre-tax and charge HST on the selling price, not on top of tax you already paid.
  • One lump sum, no sections. The customer cannot see what they are paying for, so they shop on price alone.
  • Forgetting the follow-up. A fence is a considered purchase and most homeowners collect two or three quotes. The first clear, itemized estimate that arrives has a real advantage.

Contruva’s quoting software keeps your price book for fence work saved, so cedar boards, a walk gate and a day of install labour are line items you pick, not numbers you retype. The customer signs on their phone and pays the deposit before you order materials, and follow-ups go out on schedule. See what else is included on the pricing page, or read how to write a contractor estimate that wins the job.

Sources

01Questions

Straight answers.

Still unsure? Call us at +1 (647) 922-5436. A real person picks up.

Ask us anything

How much does a fence installation cost in Canada?

Most residential fence projects in Canada land between $2,500 and $10,000 installed, according to 2026 Canadian cost guides. The installed rate runs $15 to $25 a linear foot for chain link, $45 to $85 for cedar, and $80 to $150 or more for ornamental iron.

How do you price a fence installation per linear foot?

Measure the run, then add materials and labour per linear foot, gates, removal of the old fence, permits and disposal, then overhead, profit and a contingency for rock and bad ground. Labour is 40% to 60% of the total.

How much does it cost to remove an old fence?

HomeStars puts old fence removal at $5 to $15 per linear foot, plus $3 to $8 a foot to dig out old concrete footings. Disposal is priced by weight, since old concrete is heavy.

Do I need a permit to build a fence in Canada?

It depends on the municipality and the height. Many cities need a permit above six feet or on a corner lot, and front yard fences are often limited to three or four feet. Check the local fence bylaw before you quote.

Who pays for a fence on a shared property line?

In Ontario, the Line Fences Act covers cost-sharing for boundary fences. Elsewhere, it is usually split by agreement between neighbours, so get it in writing before you build.

Should I give a fence estimate as one price or itemized?

Itemized by section, with the material and height stated, gates as their own lines, and a good, better, best option if you can. Customers trust a price they can see, and they stop shopping on the cheapest lump sum.

Quotes they sign.

Build it on site, get the deposit on approval.

Start free trial