All guidesHow-toUpdated November 2026 · Updated November 2026

How to startan HVAC businessin Canada.

Starting an HVAC business in Canada starts with the licence, not the van. Get the trade certificates and the TSSA registration sorted first, then register the business, insure it, and price your first jobs to cover your real costs.

How to start an HVAC business in Canada comes down to three things in order: the licences that let you legally do the work, a business structure that protects you, and customers who pay on time. Skip the first and the other two do not matter. A furnace install touches three regulated trades in one afternoon, gas, refrigerant and electrical, and each one has its own licence.

The good news is that the path is well worn. Thousands of techs have gone from employee to owner the same way, and the steps are the same in most provinces, with Ontario the strictest example. This guide walks through them, with Ontario specifics and notes where other provinces differ. Licensing rules change and differ by province, so check with Skilled Trades Ontario, the TSSA and your municipality before you book work. This is general information, not legal advice.

The licences you need first

Start here, before the van and the business cards. In Ontario, the licences depend on what the work touches, and a heat pump install can touch all of them.

WorkWho may do itWhat to ask for or hold
Gas furnace, boiler, tankless, gas line, ventingA contractor registered with the TSSA as a fuels contractor, using a certified gas technician: G2 for most residential appliances, G1 for largerTSSA registration number for the company, and the technician’s G2 or G1 certificate
Air conditioners and heat pumpsA Certificate of Qualification in a compulsory trade: 313A Refrigeration and Air Conditioning Systems Mechanic, or 313D Residential Air Conditioning Systems MechanicThe 313A or 313D certificate, checked on the Skilled Trades Ontario public register
Handling refrigerantAnyone holding an Ozone Depletion Prevention (ODP) card under Ontario Regulation 463/10The ODP card. On its own it does not allow work on the equipment
Electrical work on the circuitA licensed electrical contractorAn ESA/ECRA electrical contractor licence, which needs a Master Electrician on staff

The TSSA registration belongs to the company, and the G2 belongs to the person. You need both, because a registered company can still send an uncertified tech, and a certified tech working on the side is not working for a registered contractor. The 313A and 313D are compulsory trades in Ontario, which means only a person holding a valid Certificate of Qualification, a provisional certificate, or a registered apprentice working under a training agreement can legally do that work. The Red Seal endorsement on a 313A lets you work across Canada, which matters if you plan to take jobs in another province.

Some municipalities add their own layer. Brampton, for example, licences HVAC contractors directly and asks for the certificate of qualification, the TSSA registration, WSIB proof, a business registration and a $190 annual fee. Toronto and other cities have their own rules, so check the city where you will work, not just the province. New ductwork, a new HVAC system in a new house, or new exterior venting usually needs a building permit from the municipality as well.

Other provinces run their own versions of the same system, with their own trade certification bodies, gas licensing authorities and municipal rules, and the trade names and certificate numbers differ. The principle is the same everywhere: the person doing the regulated work holds the certificate, and the company holds the contractor registration.

Register the business

Once you can legally do the work, decide how the business exists. Most HVAC techs start as a sole proprietorship because it is simple and cheap, then incorporate once the revenue and the risk grow.

1
Pick a structure.

Sole proprietorship is the simplest start. Incorporation costs more up front but shields your personal assets if something goes wrong, and many techs incorporate before they hire their first employee.

2
Register the name.

If you operate under your own legal name, you may not need to register at all. If you use a business name, register it with the province. In Ontario that is a Master Business Licence.

3
Get a business number.

Register with the CRA for a business number. Once your taxable revenue passes $30,000 over four consecutive calendar quarters, you must register for GST/HST and start charging it. Many contractors register voluntarily before that, so they can claim input tax credits on tools, the van and materials.

4
Open a business bank account.

Keep business money separate from personal money from day one. It makes the bookkeeping, the taxes and the eventual sale of the business far simpler.

5
Check the municipal licence.

Some cities licence HVAC contractors directly. Apply before you advertise in that city.

Keep the paperwork where you can find it. Customers, suppliers and general contractors will ask for your business number, your insurance certificate and your TSSA registration, and the ones who ask are the ones worth working for.

Insurance and WSIB

Insurance is not optional in this trade. You are working with gas, electricity, refrigerant and water, inside people’s homes, and a mistake can cost far more than the job was worth.

  • Commercial general liability. The baseline. It covers property damage and injury to third parties. HVAC contractors on industry forums report paying around $1,500 a year for basic liability cover, though your rate depends on revenue, crew size and claims history.
  • WSIB coverage. In Ontario you must have Workplace Safety and Insurance Board coverage for your employees, and most general contractors and property managers will ask for proof before they let you on site.
  • Vehicle insurance. A commercial policy for the van, not a personal one. A personal policy can refuse a claim if the van was being used for business.
  • Tools and equipment. Cover the tools in the van, not just the van. A break-in that takes $5,000 of gauges, recovery machines and drills is a week without work.
  • Errors and omissions. Worth considering once you do design work, like sizing a system or a heat loss calculation. A wrong size is your error, and it is expensive to fix.

Get the certificate of insurance in writing and keep it current. Suppliers, builders and property managers will ask for it, and a lapsed policy is a fast way to lose a job you already won.

What it costs to start

There is no standard startup cost, because the van, the tools and the territory decide it. The table below is a worked example for a solo tech starting in Ontario with a used van, not a quote. Use it as a checklist, and price each line for your own situation.

LineWorked example
Used van, outfitted$15,000 to $25,000
Tools: gauges, recovery machine, vacuum pump, drills, hand tools$3,000 to $5,000
Licences and registration: TSSA, municipal licence, business registration$500 to $1,000
Liability insurance, first yearAround $1,500
Software: quoting, scheduling, invoicing$250 a month
Marketing: website, Google Business Profile, a few hundred dollars in ads$500 to $1,500
Working capital: fuel, materials and a month of bills$3,000 to $5,000
Total, worked exampleRoughly $24,000 to $39,000

That is the honest range for a solo start. The van is the big number, and buying a van you can pay cash for changes the math more than anything else. The second biggest number is the working capital. Jobs pay in 15 to 30 days, suppliers want payment in 30, and the van needs fuel this week. Start with enough cash to run for a month without a paycheque.

Do not finance the startup on a credit card. A business line of credit from your bank, or a supplier account with terms, costs far less. And do not buy every tool on day one. Buy the tools the first jobs need, and add the rest as the work pays for them.

Van, tools and suppliers

The van is your shop. A reliable used van with shelving, a roof rack and a ladder is worth more than a new van with a payment you cannot carry through a slow month. Set it up so you can find a part without emptying the back, and keep a small stock of the filters, capacitors, contactors and thermostats you use every week.

Open accounts with two suppliers, not one. A second supplier is your backup when the first is out of stock, and two accounts give you two prices to compare. Ask about terms: net 30 is standard, and a supplier who knows you will often extend it once you have a payment history. Keep a price book of the equipment and parts you install most, so you can quote from the driveway instead of calling the counter. Our guide to pricing a contractor job explains how to build a price from those costs, and the markup calculator does the arithmetic.

Pricing your first jobs

New HVAC businesses usually underprice, because the first jobs feel like a favour and the customer is a neighbour. Price them like a business instead, or the favour becomes the rate.

Start with your loaded labour rate: your wage, plus vacation pay, CPP and EI contributions, workers’ comp and any benefits, which typically adds 20% to 35% on top of the wage. Then add overhead, what it costs to keep the doors open whether you work or not: insurance, the van, fuel, phones, software, accounting and marketing. Add up last year’s overhead and divide by last year’s direct costs to get your rate, often around 20%. Then add profit, a line you plan for, not what is left over. Many contractors aim for a net profit of 10% or more after overhead.

Markup is not margin

If a job costs $1,000 and you mark it up 20%, you charge $1,200, but your margin is only $200 on $1,200, or 16.7%. To hit a 20% margin you need to charge $1,250. Price = cost ÷ (1 − margin).

For a furnace replacement or a heat pump install, quote the equipment, the labour, the materials, the permit and the disposal as separate lines, so the customer sees what they are paying for and you can defend the number. Give a good, better, best layout where it fits: a standard furnace, a two-stage, and a modulating unit with a heat pump. Customers who choose the middle option are not shopping you against someone else. They are choosing their budget.

Send the quote the same day as the visit, while the conversation is fresh. A quote that arrives in two weeks says you are not organized, no matter how good it is. Build it on site with Contruva’s quoting tool, send it before you leave the driveway, and the customer can sign and pay the deposit on their phone. Our HVAC estimate template covers what goes on the quote, and the contractor estimate template works for the smaller jobs.

Finding your first customers

Your first customers are the cheapest ones to find, because they already know you. Tell everyone you know that you are open for business, and then build the channels that keep the phone ringing after that list runs out.

  • Your old employer’s customers, done right. Do not poach. But customers who ask for you by name, neighbours, family and the people you have already helped are fair game, and they are the best first jobs you will get.
  • Google Business Profile. Claim it, verify it, and fill in everything: services, service area, hours, photos of real jobs. It is the single biggest factor in showing up when someone searches for an HVAC contractor near them. Our local SEO guide walks through it.
  • Maintenance plans. A furnace check in the fall and an AC check in the spring, sold as a plan, gives you recurring revenue and a reason to be in front of the customer twice a year. It is the steadiest work a new HVAC business can sell.
  • Reviews from job one. Ask every happy customer for a Google review, right when the job wraps up, with a direct link. Our guide to asking for Google reviews covers the wording.
  • Referrals from other trades. Plumbers, electricians, home inspectors and property managers all meet customers who need HVAC work. A short introduction and a reliable turnaround earns you their referrals.
  • Real estate agents and property managers. They need fast, reliable HVAC work on listings and rentals, and they pay on time. One good agent can fill a week.

Do not buy a big ad campaign before the basics are in place. A website that says what you do and where, a Google profile with reviews, and a phone that gets answered will beat a billboard for a new HVAC business. And answer the phone. A missed call is a job for the next company on the list, which is why Contruva’s AI receptionist answers in your business name and books the visit while you are on a roof.

Hiring your first tech

Hire when the work is turning you away, not before. A second tech who sits idle for a week costs you the same as a second tech who works, and the first hire is the most expensive mistake a new business can make.

An apprentice is the usual first hire in Ontario. A registered apprentice working under your training agreement can do compulsory trade work under your supervision, and the apprenticeship gives you a tech who learns your way of working. The ratio rules matter: a journeyperson can supervise a set number of apprentices, so check the current ratio with Skilled Trades Ontario before you hire.

Pay for the ticket, not the warm body. A tech with a 313A or a G2 is worth more than a helper, because they can work unsupervised and sign off on the job. And hire for attitude as much as skill: the tech who calls the customer, cleans up, and writes the notes is the one who earns the review.

Mistakes that sink new HVAC businesses

  • Working without the licence. It is illegal, it voids the insurance, and the first customer who checks the register will find out. Get the certificates before the van.
  • Pricing by the hour with no overhead. A $75-an-hour rate that ignores insurance, the van and the software is a rate that loses money on every job.
  • No deposit. Equipment is ordered before the job starts, and a customer who cancels after you ordered a furnace leaves you holding it. Take a deposit on every install. Our deposit guide covers what is fair.
  • Chasing every job. The cheapest customers are the most expensive to serve. A customer who haggles over the quote will haggle over the invoice too.
  • Ignoring the slow season. Shoulder seasons are quiet. Sell maintenance plans and book spring installs in the winter, or the quiet months will eat the busy ones.
  • Doing the books on Sunday night. Receipts, invoices and follow-ups pile up, and the tax bill arrives as a surprise. Keep the receipts with the job as they happen.

Most of these are avoidable with a system that does the remembering for you: quotes that go out the same day, invoices that chase themselves, and a record of every job, every receipt and every customer. That is what Contruva is built for. See how it works for HVAC contractors, or go straight to pricing. One plan, $249.99 CAD a month, no per-seat pricing, free for 7 days, no credit card.

Sources

01Questions

Straight answers.

Still unsure? Call us at +1 (647) 922-5436. A real person picks up.

Ask us anything

Do I need a licence to start an HVAC business in Ontario?

Yes, for the regulated work. You need a Certificate of Qualification in 313A or 313D for refrigeration and air conditioning work, a G2 or G1 gas technician certificate for gas work, and a TSSA fuels contractor registration for the company. Handling refrigerant also needs an ODP card, and electrical work needs an ESA-licensed electrical contractor.

How much does it cost to start an HVAC business?

A solo tech starting with a used van typically needs roughly $24,000 to $39,000, as a worked example: a used van at $15,000 to $25,000, tools at $3,000 to $5,000, licences and registration around $500 to $1,000, insurance around $1,500 a year, plus software, marketing and a month of working capital. Your numbers will differ.

What is a TSSA registration?

It is the Technical Standards and Safety Authority registration that a company needs to do gas work in Ontario. The registration belongs to the company, while the G2 or G1 gas technician certificate belongs to the person doing the work. You need both.

Can I start an HVAC business with no experience?

Not legally, for the regulated work. You need the trade certificates first, which means completing an apprenticeship or holding a Certificate of Qualification. If you have the business skills but not the ticket, partner with a licensed tech or hire one, and do not do regulated work yourself.

Do I charge HST on HVAC work?

Yes, if you are registered for GST/HST. You charge it on the full price of the job, and you claim back the HST you paid on materials and equipment as an input tax credit. Once your taxable revenue passes $30,000 over four consecutive calendar quarters, registration is mandatory. This is general information, not tax advice.

How do I get my first HVAC customers?

Start with people who already know you, then build a Google Business Profile with real job photos and reviews, sell maintenance plans for steady work, and build referrals from plumbers, electricians, home inspectors and property managers. Answer every call, because the first contractor to respond usually wins the job.

Quotes they sign.

Build it on site, get the deposit on approval.

Start free trial